Copper wire drawing machine is a common metal processing equipment widely used in industrial production. However, due to improper use or equipment issues, copper wire drawing machines may encounter some common problems. This article will introduce these issues and provide solutions to help you better use copper wire drawing machines.
1. Poor drawing of copper wire by wire drawing machine
When the surface of the copper wire pulled out by the copper wire drawing machine is rough or uneven, it may be because the machine's wire brush needs to be replaced or cleaned. You can check the wire brush and replace or clean it as needed.
2. Insufficient tension of the copper wire drawing machine
The copper wire drawing machine may experience insufficient tension when pulling copper wire. This may be due to insufficient air pressure or damage to internal components of the machine. You can check if the air pressure is normal. If the air pressure is normal, it may be necessary to replace accessories, such as springs or cylinders.
3. The copper wire drawing machine produces noise
When the copper wire drawing machine makes noise during operation, it may be due to the need for replacement or lubrication of the machine's chains. You can inspect the chain and replace or lubricate it as needed.
4. The copper wire drawing machine pulls the wire too fast or too slowly
A copper wire drawing machine that pulls wires too fast or too slowly can cause poor copper wire drawing. This may be due to incorrect speed setting of the machine. You can check the speed setting of the machine and adjust it as needed.
Overall, issues with copper wire drawing machines may affect production efficiency and output. By identifying these issues and taking appropriate measures, you can ensure the normal operation of the copper wire drawing machine and achieve better production results.