Wire drawing machine is a common metal processing equipment, mainly used to process metal materials into fine wires or tubes. It is widely used in industries such as wires and cables, steel, and construction. This article will introduce the usage of wire drawing machines.
1、 Safe operation
Before using the wire drawing machine, it is necessary to wear protective equipment such as a safety helmet, safety glasses, earplugs, etc. to ensure personal safety
2. Check if the power cord of the wire drawing machine is damaged and if there are any abnormalities in the equipment. If there are any problems, they should be repaired or replaced in a timely manner,
Before operating the wire drawing machine, the working area should be organized to ensure that there are no debris around to avoid affecting the operation.
When operating the wire drawing machine, it is important to keep your hands dry to avoid slipping and causing injury.
2、 Preparation work
1. Cut the metal material that needs to be processed into appropriate lengths to ensure that it can be inserted into the feeding port of the wire drawing machine.
2. Chamfer both ends of the metal material to facilitate entry into the drawing machine mold.
3、 Adjusting the wire drawing machine
1. Turn on the power switch of the wire drawing machine to ensure normal power supply.
2. Choose a suitable wire drawing mold based on the type and requirements of the metal material, and install it on the machine.
3. Adjust the feeding roller of the wire drawing machine to align it with the feeding port of the drawing mold, and ensure that the material can smoothly enter the wire drawing machine.
4. Adjust the tension control device of the wire drawing machine to match the stretching degree of the metal material to ensure the drawing effect.
4、 Start wire drawing
1. Put the prepared metal material into the feeding port of the wire drawing machine, and drive it into the wire drawing mold through the roller.
During the wire drawing process, it is necessary to maintain appropriate tension to ensure the drawing effect. Excessive tension can cause material fracture, while insufficient tension cannot achieve the required wire drawing effect.
During the wire drawing process, it is necessary to constantly observe the state of the metal material to ensure that the drawing effect meets the requirements.
After the wire drawing is completed, take out the drawn metal material from the discharge port of the wire drawing machine for cleaning and inspection.
5、 Maintenance and upkeep
After using the wire drawing machine, metal shavings and other debris on the machine should be cleaned in a timely manner to maintain its cleanliness.
2. Regularly check whether the power cord and transmission components of the wire drawing machine are loose or worn. If there are any problems, they should be repaired or replaced in a timely manner.
3. The lubrication part of the wire drawing machine should be regularly lubricated with lubricating oil to ensure the normal operation of the machine.
When the wire drawing machine is not used for a long time, it should be stored in a dry and ventilated place to avoid moisture and rust on the machine.
Through the above steps, we can correctly use the wire drawing machine for metal material drawing processing. During the operation process, we must pay attention to safety, follow operating procedures, and ensure the safety of ourselves and others. At the same time, regular maintenance and upkeep of the wire drawing machine can extend its service life and improve work efficiency. I hope this article is helpful for you to understand the usage of wire drawing machines.
Source: Baidu Wenku
The copyright of this article belongs to the original author. If there is any source error or infringement of your legitimate rights and interests, you can contact us through email, and we will handle it promptly. Email address: kf@doing.net.c